LAAS Ring-Lock Manual

Pair with the App

Download the LAAS app (Pre-launch)

iOS: https://testflight.apple.com/join/nFtiVGHZ

Android: https://github.com/Laas-Copenhagen/public/raw/refs/heads/main/Android/LAAS-v0.9.2(3).apk

Open the app and follow the on-screen instructions to pair your phone and lock.

You’ll see the battery status after pairing — charge if needed.

Minimum requirements:

iPhone X (iOS 16+)

Android 8.0+

Tracking setup

1. Locate the button on the side of the lock.

2. Press the button three times.
     The light will flash with each press.

3. Open the manufacturer  app → tap ‘+’ → ‘Add Other Item’

4. Select Ring-Lock when it appears → tap Connect

Mount the Lock

Use the included screws to bolt the lock to your bike’s frame (M5 threaded holes).

Mounting requires a 4 mm hex key (not included).

No frame holes?

Click here

This guide includes images for:

• FlexMount

• V-brake bracket

Lock & Unlock

To lock:

Lift and rotate the handle until it clicks.

To unlock:

Use the LAAS app.

Share & Revoke Access

Manage users from the app:

Tap the icon in the top left corner → Share or revoke access as needed.

 

Battery & Charging

The USB-C port is under the rubber lid.

You can charge it with your phone — or anything else USB-C.

A full charge takes 90 minutes.

The button lights up while charging.